Characteristics
- Type
- ultrasonic pulse
Description
OPGUD PR2 is an ultrasonic pulser suitable for work with all ultrasonic transducers with about 500pF – 20nF impedance.
Method of operation:
The rising edge of the Trigger signal (see picture) initiates the transducer charging process. After this time, the falling edge of the Trig_Out is generated which indicates the end of the transducer charging process and a transistor switch which discharges the transducer is turned on. ·
Pulse amplitude: 100V – 1300V
Duty: 50% – 95%·
Frequency: 0.7 – 170Hz
Trigger output/input: TTL
